We’re not watering down this threat to your chimney

2013-04-22T17:12:00Z We’re not watering down this threat to your chimneyAlbert Bailitz | Albert the Chimney Sweep nwitimes.com
April 22, 2013 5:12 pm  • 

CROWN POINT | We are big fans of the May flowers, but we’re more concerned with something else April showers can bring: indications of serious damage to chimneys.

We often sound the alarm about fire danger, but prolonged exposure to water is just as big a concern when it comes to chimney safety.

When your masonry or factory-built fireplace is exposed to water, the result can be cracks or gaps in your chimney where creosote can collect and increase the risk of fire or where noxious gases can escape into your home and expose your family to carbon monoxide.

WHAT TO LOOK FOR

Rust stains: More particular to factory-built fireplaces, rust is a critical red flag that water is accessing your chimney and threatening the integrity of the structure. Rust stains could reveal themselves around the outside of the upper chimney, or along the inner lining of the fireplace, or water drip marks on the face of your fireplace.

“Rust stains in the fireplace area are of serious concern. Like the tip of an iceberg, by the time you see the evidence down in the fireplace, water damage to the damper or upper chimney structure is likely very critical,” says Albert the Chimney Sweep..

Dripping or standing water: This may seem obvious, but water pooling anywhere in or around your masonry or factory-built chimney and fireplace structure means water has an access point to your home. We at Albert the Chimney Sweep are aware of these issues and know what to look for.

Bent or damaged flashing: The metal materials used to help seal your chimney from rooftop water runoff must be flush to the chimney structure. Caulking can fail; flashing, crickets or other devices can warp or otherwise separate from the chimney over time, exposing your structure to water.

WHAT TO DO

Use a chimney cap: Sometimes called a rain cover, a chimney cap works to protect your chimney the way your roof works to protect your house. Water has direct access to your home when a rain cover is not installed on your chimney.

Apply waterproofing agents: Particular to masonry chimneys, adding a vapor-permeable waterproofing agent to you chimney’s exterior lets moisture escape, but prevents it from coming in. Be sure to never use paint or any non-vapor-permeable water sealer because it will trap moisture inside the chimney, hastening deterioration.

Call Albert the Chimney Sweep 219-476-7708: To perform the recommended jobs above or any other repair work on a leaky chimney, we are the professionals when it comes to diagnosing and repairing chimney problems.

Copyright 2014 nwitimes.com. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.

activate-button-3
Follow The Times

Poll

Loading…

Have you ever visited the John Dillinger Museum?

View Results